| The Imacc system has several cell based accessories tailored to industrial monitoring and process control. These vary from fixed 10-cm cells to variable path 150-m folded-path cells. All cells can be heated to over 200° C and automated temperature control systems are available.
The cell chosen depends on the concentration ranges to be monitored. Imacc will assist in choosing an appropriate cell or we will build a custom one if that is needed.
Cell Choices and typical Detection limits possible with them
<detection limits...>
|
Cell
|
Typical Detection Limits
|
|
10 cm
|
~ 10 ppm
|
|
10-m
|
0.1
|
|
32 m
|
0.03
|
|
150 m
|
0.001
|
|
 |
| The 10-m cell accessory attached to the base unit forming a full CEM/stack or portable monitor for detections to 0.1 PPM. |
 |
| The 32-m cell accessory attached to the base unit for low-level detections for CEM/Stack monitoring |
 |
| Base Unit integrated into Class I Div. 2 monitor for industrial use. This monitor is mounted outdoors in a highly vibrational area and has worked perfectly in this environment for several years. The process stream monitored consists of 70% water and 30% CO2 with buried organics. These organics are being monitored at the low ppm-level. |
 |
| A dual 150 meter cell accessory for the FTIR base unit configured into a tow-behind trailer for use as a mobile laboratory in regulatory monitoring. This system is capable of 1 to 5 ppb detection levels for most compounds of concern in environmental work. |
 |